New possibilities in the generation of process air AERZEN Delta Hybrid D 52 S The already extensive product portfolio of the AERZEN rotary lobe compressor series Delta Hybrid has been further extended with the introduction of the new size D 52 S. Delta Hybrid D 52 S, our latest extension of the seriesThe compression of air and neutral gases is very energy-intensive. Today, the generation of process air covers a major part of the energy costs for pneumatic applications or for the municipal and industrial waste water treatment. It is more important than ever for the plant operators to select the right compressor or blower for their process. Following their introduction in 2010, and with more than 4,000 installations since, AERZEN has extended the series of Delta Hybrid rotary lobe compressors permanently. The current product range comprises a total of 16 sizes. Due to the wide range of sizes and different pressure capabilities, this technology is suitable for a variety of applications in the field of pneumatic generation of process air. Delta Hybrid captivates through its energy efficiency: it makes savings of up to 15 per cent possible compared with conventional packages. Now AERZEN complies with the request of customers and particularly offers in the medium volume flow range, which is increasingly requested, a closer separation of sizes. The new Delta Hybrid D 52 S covers a volume flow range of 720 to 3,120 m³/h as well as a drive power from 11 to 110 kW. Compact design and the small outer dimensions in this volume flow range are another reason for the new series. In addition, investment costs are reduced for plant operators and system manufacturers due to the smaller connection nominal width DN 150.
CE-marking for AERZEN Vacuum Blowers At the beginning of this year, following a new evaluation, AERZEN vacuum blowers of type HV and CM are complete machines, having attained the valued CE marking. This provides considerable simplifications for customers. AERZEN has re-evaluated with success the distinction between a complete and an incomplete machine through a new legal opinion for the purposes of the Machine Directive.
A new look for Aerzen Turbo The successful Aerzen Turbo-Series TB has been updated: The innovative system was specially developed for biological wastewater treatment plants with small and average volume flow requirements. Now, the series TB, which, at present, is available in eleven sizes, has been the subject of numerous constructive adjustments, through which energy consumption has been reduced by up to six percent. The small dimensions of the TB series results in extremely high power density. Moreover, the air conveyance has been optimised. Due to the separation of electrical and mechanical technology, heat losses are not transmitted to process air and the efficiency and reliability of the electrical technology is increased.
News from the AERZEN site After a one year construction period, the new production hall in the centre of the AERZEN premises is now ready to move into. The processing machines, which had been enclosed, or put in temporary storage during the construction period, have restarted their production operations. In another section, a portal milling machine has been replaced by a new Uniport 7000. This ultramodern machining centre has a mobile portal with a fixed table, which allows flexible and precise multi-sided machining of large components, such as pistons and housing parts. Thanks to the changeover to a Siemens Sinumerik 840D control system, the Uniport 7000 can be programmed with 3D data.
Service location South re-staffed Due to the continuously increasing number of machines to be serviced and customers to be supported in this region, AERZEN decided to re-staff the Service location Blaubeuren/South: since mid 2015, service technician Izudin Licina has been responsible for postal code area 7, and Markus Mühlbauer for postal code area 8 and parts of area 9.
New representation in Vietnam AERZEN wanted to strengthen its presence in Asia and thus established a new representation in Ho Chi Minh City, Vietnam in the middle of last year. Since 6th July 2015, Nha Ca Nguyen has been responsible for all local business developments. In future, Nha Ca Nguyen will work closely with sales engineer Edmund Tan of Aerzen Asia Singapore.
New Sales Manager for Iran Jalil Pazoki is the new AERZEN Sales Manager for the Sales region of Iran. Since 1st October 2015 he has represented AERZEN from his office in Tehran. Pazoki has both German and Iranian nationalities, studied electrical engineering, and in his previous roles he worked for system manufacturers and other engineering companies, and as a project and sales engineer in Iran, where he was able to make contact with numerous AERZEN customers.
AEO-F Certificate extended After a successful monitoring on 14th December 2015, the main customs office Hanover has renewed the AEO-F certificate for AERZEN. As Authorized Economic Operators AERZEN‘s customs procedures and export of goods operations are streamlined, so that a fast and secure supply chain can be guaranteed for the customer.
