Yeni nesil Aerzen Turbo G5plus ile AERZEN, sınıfının en kompakt ve verimli turbo blowerini geliştirdi.
Piyasaya yeni sunulan Aerzen Turbo G5plus ismini hakediyor çünkü birçok ek avantaja sahip. Yeni turbolar son derece kompakt bir yapıya sahip ve kurulum için çok küçük bir alan gerektiriyor. Bunun yanında, çift kaplamalı yenilikçi AERZEN hava yataklı rulmanlar ve yeni çok seviyeli frekans invertörü (> 55 kW), motordaki ısı kaybını minimuma indiriken toplam verimliliği de kayda değer şekilde arttırıyor. Bir avantaj daha: konvansiyonel frekans invertörlerinde kullanılan sinüs filtresi ise artık gerekli değil.
Dikkat çekici bir diğer gelişme de, Teflon ve grafitten oluşan çift kaplamalı yeni hava yataklı rulmanlardır. Yüksek sıcaklık dayanımına sahip olan bu rulmanlar, dur/kalk döngüsünden bağımsız olarak > 80,000 saat çalışma süresine sahiptir.
Aerzen Turbo G5plus 300 m³/h ile 9,400 m³/h arası debi ve maksimum 1,000 mbar çalışma basıncında kullanılabilmektedir. En küçük model olan AT 25-0.8 G5plus ile en büyük model olan AT 200-1.0 G5plus arasında toplamda sekiz model bulunmaktadır. Beş model de halihazırda hazırlık aşamasındadır.
he two new turbo sizes, Aerzen Turbo AT 35 and AT 60, are designed for medium volume flows of 700 - 2,700 m3/h and package capacities of up to 20 kW resp. 50 kW. Thanks to a completely newly developed motor design, the maximum differential pressure has also been optimised up to 900 mbar.
The development team was able to turn the efficiency screw once again and achieve significant increases in performance. The energy improvement of up to 10% is based on an aerodynamic redesign of the turbo impeller and the spiral housing. Sophisticated CFD analyses were the cornerstone for achieving this new level of efficiency.
In addition, the AERZEN turbo packages of the G5plus series have been subjected to further acoustic optimisation. Not only has the machine noise been reduced to an exceptionally quiet level of 72 dB(A), but the discharge and piping noise has also been reduced by a significant 10 dB(A), so that in future there will be no need for silencers on the system side.
AERZEN has built turbo blowers since 1911. Over the years, we’ve continued to perfect these assemblies from a technological standpoint. Along the way, we’ve developed expertise that sets standards worldwide today. It’s reflected in the performance characteristics, in every component, and in all the details of the newest Turbos. Discover the new Turbo Generation 5 and Generation 5plus.
Further information are available within the product brochure