Performance3 - the new generation. AERZEN expands technology concept.

Ideal combination of technological advantages

Whether Delta Blower, screw blower, Delta Hybrid or Aerzen Turbo: each blower technology has individual strengths, but also physical limits. The key to success is the combination of the technologies: in this way, the respective technological strengths can be combined and possible weaknesses eliminated.

Thus, the turbo blower offers above-average energy efficiency at the design point and is thus predestined to handle the base load. However, the control range of turbo machines is physically limited between 35% and 100 %. Thus, the efficiency decreases in part-load operation. This is the strength of rotary lobe machines, which are characterised by a controllability of 25% to 100 % and an almost constant efficiency even in partial load operation. The innovative screw blowers and the robust positive displacement blowers are therefore perfectly suited for generating peak or off-peak load requirements. Depending on the system configuration and load, these three technologies can be switched in interaction or as individual solutions to achieve maximum efficiency for the entire load demand based on their focus.

Technically and economically the optimum

During the development of the new Delta Hybrid and Aerzen Turbo packages, the focus was mainly on a further increase of the energy efficiency and thus the consistent optimisation of the cost balance. These advantages are also reflected in the Performance³ concept. The result: highest energy savings with best control range and lowest investment volume. Furthermore, depending on the system, the payback period is less than two years.