Product expansion for Delta Blower Positive Displacement Blowers New intermediate size with volume flows of up to 6,300 m³/h AERZEN’s extensive assembly series has been expanded to cover intake volume flows of 6,300 m³/h. This enables AERZEN to offer its customers even more finely graded blower sizes. Individual requirements for process air production can, thus, be fulfilled in a more applied manner and more efficiently. The new positive displacement blower stage GM 100S fills the gap in the upper volume flow range.With the new size GM 100S within the Delta Blower series, the previous volume jumps of 5,400 and 7,900 m3/h are clustered even more differentiated, in this case with an intermediate size of 6,300 m³/h at a nominal diameter of DN 250 and a pressure range of up to 1,000 mbar. The expansion of the blower portfolio is the answer to the increased demand in this volume or pressure range. AERZEN is further expanding the position of the powerful Delta Blower product family with a finer gradation. Offering a wide range of applications for the oil-free transport of air and neutral gases, the Generation 5 Delta Blower assemblies highlight the more than 150 years of development expertise of the technological pioneer AERZEN: powerful, robust positive displacement blowers, which are also highly reliable in continuous operation and convince by their durability. Easy to handle and designed to produce a low level of noise, the blower stages of the Delta Blower series are packed with German engineering expertise and also prove themselves under difficult climatic as well as special environmental conditions. The machines’ intelligently designed hardware stands out with a compact design that also makes space-saving side-by-side installation possible. All assemblies can be used outdoors or indoors as a stand-alone or integrated system. The volume flow of the various assemblies ranges from 30 to 15,000 m³/h; the control range spans from 25 to 100%, covering nominal widths from 50 DN to 400 DN. According to the AERZEN “100% free of oil and absorbents” promise, all Delta Blower assemblies guarantee product purity/process air purity because the company dispenses with absorption material for soundproofing. The base support acts as a discharge silencer, which uses air deflection to reduce sound. Advantage: this does not cause wear that could contaminate the downstream system. Oil-free conveying according to class 0 guarantees absolute purity in process air production, so that even sensitive production conditions can be handled with 100 percent safety.
New and revised marketing materials AERZEN has recently revised or introduced new marketing materials for the application areas of wastewater treatment, food technology and process gas technology.How can energy costs be saved in wastewater treatment? How can hygienically pure process air be generated? What requirements must modern process gas compression meet? These are some of the questions which AERZEN customers will have to ask themselves in order to address the challenges posed by Industry 4.0, globalisation and constantly increasing cost pressures. We are supporting you in dealing with these challenges and offer answers to your questions in our new brochures. You can download the new brochures using your CustomerNet access via our website, or printed versions can be ordered by completing this request form: https://www.aerzen.com/company/request-and-contact/directory-of-contacts.html
New head for Western Europe Matthew Morey has been appointed the new Director of AERZEN’s Western Europe region. He will, thus, run the ten Western European sales and service companies of the AERZEN Group, form a management team for the EMEA region with the other regional managing directors in Europe and be the primary interface with production.Morey joined the AERZEN Group in 2006. For the last 14 years, he has been the head of AERZEN Machines Ltd., Great Britain. This business has achieved many successes, laying the foundations for more of the same in the future. Now Matthew Morey’s strategic know-how and sound market knowledge will benefit the Western Europe region.
New Managing Director Aerzen Belgium In March 2020, Frederik Deboyser took over the management of Aerzen Belgium N.V., based in Kortenberg near Brussels. The graduate engineer, who successfully completed a degree in electromechanics in 1993, has been at home in the world of blowers for over 24 years. From 1998 to 2007 and since 2014 he was Sales Manager at AERZEN’s Belgian subsidiary. For the operational and strategic management of Aerzen Belgium the new Managing Director relies on a team which comprises both long-term as well as some relatively new employees. “With this mixture of our own experience and external developments, we are ready to develop the Belgian market with renewed vigour and energy, focusing on customer orientation and the quality of our products and services,” emphasises Frederik Deboyser.
Americas: Wastewater specialist supports Sales Jennifer Kintzer has taken over the position of application specialist for wastewater technology in the Americas region. With 25 years of experience in the wastewater industry, in her new role she will support the sales team in increasing performance in the wastewater industry in North, Central and South America and in the Caribbean. One of her priorities is the training of regional colleagues. Jennifer Kintzer worked in consulting for almost 20 years before she joined AERZEN USA as a Senior Applications Engineer, with responsibility for positive displacement blowers, screw compressors and turbo blowers.
APAC: New Regional Application Manager Wong Kah Wai took over the position of Regional Application Manager for the Asia/Pacific region (APAC) on April 1, 2020. He is based in Singapore. In conjunction with our subsidiaries in this region, he will seek to expand business with the wastewater industry. The 43-year-old has more than 15 years of experience in design, operation and consulting for leading wastewater companies such as Sembcorp Utility, UG M&E, Sumitomo Electrics, Mitsubishi Heavy Industries, United Engineers, Black & Veatch and CH2Mhill. Wong Kah Wai holds a Master of Science and a Bachelor of Engineering in Environmental Engineering from the University of Singapore.
