AERZEN Turbo Generation 5

Turbocompresseurs

3D representation of the product

If you are in the market for a reliable high-performance turbo blower, consider the Aerzen Turbo Generation 5. This oil-free high-speed turbo blower is ideal for middle and high intake volume flows in industrial and municipal wastewater treatment facilities and variety of other low pressure applications.

It features robust, energy-efficient construction with low maintenance requirements and ease of use. This blower design can deliver 1200 to 16,200 m³/h of air and neutral gas volume flows.

Les avantages d’AERZEN Turbo Génération 5 d’un coup d’œil :

Économies d’énergie jusqu’à 30 % dans les systèmes combinés
Jusqu’à 80 % d’efficacité opérationnelle
Frais d’entretien minimes
Degré élevé de fiabilité et longévité
100 % exempt d’huile

Type de construction

Turbocompresseurs

Débit

3.000 à 16.200 m³/h

Fluide à véhiculer

air , gaz neutres

Transport / compression

exempt d'huile.

Opération pression

600 - 1.000 mbar

There's a lot to be said about the economical Turbo. We'll make it brief here.

AERZEN has built turbo blowers since 1911. Over the years, we’ve continued to perfect these assemblies from a technological standpoint. Along the way, we’ve developed expertise that sets standards worldwide today. It’s reflected in the performance characteristics, in every component, and in all the details of the newest Turbos. Discover the new Turbo Generation 5 and Generation 5^plus.

100% Turbo

For small and large volume flows
From 300 m³/h to 16,200 m³/h
Speed-controlled
100% oil-free

Efficient peak values

Increase in energy efficiency by up to 10% compared to conventional turbo technology
Control range of 40% - 100%
Highly efficient individual components

Innovation driver: the permanent magnet motor

Extremely high-efficiency and energy-saving permanent magnet motor
Requires no additional energy to magnetize the rotor
Outstanding efficiency of an almost constant 96%, even in partial load operation

Innovative AERZEN air foil bearings

Forward-looking double coating made of Teflon and graphite
Theoretical bearing lifetime of >80,000 operating hours, regardless of stop and start cycles (>80 starts/stops per hour)
Resistant to pressure peaks (for example, SBR processes, pulsations caused by positive displacement machines) and compressor surge
Highly functional without necessary accessories (for example, electric control system, back up bearings, auxiliary electronics such as battery systems)
Highly reliable operation even during voltage fluctuations and power supply failures
100% maintenance free

Further information is available within the product brochure (please select a performance to see the product brochure)

Calibrage de cycle de chargement précis : pour une efficacité accrue dans les process d’aération de bassin.

Sachant que la consommation d’énergie des usines de traitement des eaux usées conventionnelles peut atteindre 80 % des coûts totaux, l’impact est clair : chaque pourcentage d’économie compte. Que ce soit en termes de coût ou en termes d’environnement. Les valeurs de performance du Turbo Aerzen Génération 5 assurent une efficacité maximale dans les réservoirs d’eaux usées. En chiffres : des économies d’énergie jusqu’à 30 %. Jusqu’à 80 % d’efficacité opérationnelle C’est vraiment surprenant, presque révolutionnaire ! AERZEN estime que c’est simplement la façon la plus responsable de gérer les ressources dans les usines de traitement des eaux usées.

Accessoires & solutions

AERSMART

Silencieux de refoulement