Aerzen Turbo G5 plus! 02/09/2019 With the new generation Aerzen Turbo G5plus, AERZEN has designed the most compact and efficient turbo machine in its class. With the two new models AT75 and AT100, available immediately, the Aerzen Turbo G5plus portfolio has now been extended by another five to 13 sizes. New models AT75 and AT100 are now availableThe Aerzen Turbo G5plus is available in all flow rates from 300 m³/h to 8,400 m³/h, and with a maximum pressure of 1,000 bar. The current selection of blower sizes ranges from the small AT 25-0.8 G5plus to the largest model AT 200-1.0 G5plus. The series Aerzen Turbo G5plus lives up to its name, because it convinces through numerous advantages. The five new turbo machines have an extremely compact design and require very little space. Further outstanding features are the innovative AERZEN air foil bearings with double coating and the new multilevel frequency converter technology, which reduces the heat loss in the motor to a minimum and, consequently, improves the total efficiency significantly. Another advantage: an additional motor throttle or a sine filter, which has to be used with conventional frequency converters, is no longer necessary. The new air foil bearings represent a further decisive development thanks to double coating, consisting of Teflon and graphite. It impresses with increased temperature resistance and an increased service life of > 80,000 operating hours, regardless of start and stop cycles.The Aerzen Turbo G5plus is available in all flow rates from 300 m³/h to 8,400 m³/h, and with a maximum pressure of 1,000 bar. The current selection of blower sizes ranges from the small AT 25-0.8 G5plus to the largest model AT 200-1.0 G5plus. The series Aerzen Turbo G5plus lives up to its name, because it convinces through numerous advantages. The five new turbo machines have an extremely compact design and require very little space. Further outstanding features are the innovative AERZEN air foil bearings with double coating and the new multilevel frequency converter technology, which reduces the heat loss in the motor to a minimum and, consequently, improves the total efficiency significantly. Another advantage: an additional motor throttle or a sine filter, which has to be used with conventional frequency converters, is no longer necessary. The new air foil bearings represent a further decisive development thanks to double coating, consisting of Teflon and graphite. It impresses with increased temperature resistance and an increased service life of > 80,000 operating hours, regardless of start and stop cycles.The Aerzen Turbo G5plus is available in all flow rates from 300 m³/h to 8,400 m³/h, and with a maximum pressure of 1,000 bar. The current selection of blower sizes ranges from the small AT 25-0.8 G5plus to the largest model AT 200-1.0 G5plus. The series Aerzen Turbo G5plus lives up to its name, because it convinces through numerous advantages. The five new turbo machines have an extremely compact design and require very little space. Further outstanding features are the innovative AERZEN air foil bearings with double coating and the new multilevel frequency converter technology, which reduces the heat loss in the motor to a minimum and, consequently, improves the total efficiency significantly. Another advantage: an additional motor throttle or a sine filter, which has to be used with conventional frequency converters, is no longer necessary. The new air foil bearings represent a further decisive development thanks to double coating, consisting of Teflon and graphite. It impresses with increased temperature resistance and an increased service life of > 80,000 operating hours, regardless of start and stop cycles.The Aerzen Turbo G5plus is available in all flow rates from 300 m³/h to 8,400 m³/h, and with a maximum pressure of 1,000 bar. The current selection of blower sizes ranges from the small AT 25-0.8 G5plus to the largest model AT 200-1.0 G5plus. The series Aerzen Turbo G5plus lives up to its name, because it convinces through numerous advantages. The five new turbo machines have an extremely compact design and require very little space. Further outstanding features are the innovative AERZEN air foil bearings with double coating and the new multilevel frequency converter technology, which reduces the heat loss in the motor to a minimum and, consequently, improves the total efficiency significantly. Another advantage: an additional motor throttle or a sine filter, which has to be used with conventional frequency converters, is no longer necessary. The new air foil bearings represent a further decisive development thanks to double coating, consisting of Teflon and graphite. It impresses with increased temperature resistance and an increased service life of > 80,000 operating hours, regardless of start and stop cycles. All advantages at a glance:Increase of energy efficiency by up to 10% compared to conventional turbo technology.Extended bearing life thanks to innovative AERZEN air foil bearings with double coating, maximum reliability even under extreme operating conditions.100% oil-free.Lowest maintenance effort, only regular filter change.Extended fields of application at ambient temperatures up to 50°C.Active surge protection by means of automatic speed increase.Space-saving design.Press releasePI_AerzenTurbo_G5plus_EN.pdfPI_AerzenTurbo_G5plus_EN.pdfPI_AerzenTurbo_G5plus_EN.pdfPI_AerzenTurbo_G5plus_EN.pdfPress releasePress releasePress releaseImage (print quality)AerzenTurbo_G5plus_01.jpgAerzenTurbo_G5plus_01.jpgAerzenTurbo_G5plus_01.jpgAerzenTurbo_G5plus_01.jpgImage (print quality)Image (print quality)Image (print quality)New models AT75 and AT100 are now availableThe Aerzen Turbo G5plus is available in all flow rates from 300 m³/h to 8,400 m³/h, and with a maximum pressure of 1,000 bar. The current selection of blower sizes ranges from the small AT 25-0.8 G5plus to the largest model AT 200-1.0 G5plus. The series Aerzen Turbo G5plus lives up to its name, because it convinces through numerous advantages. The five new turbo machines have an extremely compact design and require very little space. Further outstanding features are the innovative AERZEN air foil bearings with double coating and the new multilevel frequency converter technology, which reduces the heat loss in the motor to a minimum and, consequently, improves the total efficiency significantly. Another advantage: an additional motor throttle or a sine filter, which has to be used with conventional frequency converters, is no longer necessary. The new air foil bearings represent a further decisive development thanks to double coating, consisting of Teflon and graphite. It impresses with increased temperature resistance and an increased service life of > 80,000 operating hours, regardless of start and stop cycles.The Aerzen Turbo G5plus is available in all flow rates from 300 m³/h to 8,400 m³/h, and with a maximum pressure of 1,000 bar. The current selection of blower sizes ranges from the small AT 25-0.8 G5plus to the largest model AT 200-1.0 G5plus. The series Aerzen Turbo G5plus lives up to its name, because it convinces through numerous advantages. The five new turbo machines have an extremely compact design and require very little space. Further outstanding features are the innovative AERZEN air foil bearings with double coating and the new multilevel frequency converter technology, which reduces the heat loss in the motor to a minimum and, consequently, improves the total efficiency significantly. Another advantage: an additional motor throttle or a sine filter, which has to be used with conventional frequency converters, is no longer necessary. The new air foil bearings represent a further decisive development thanks to double coating, consisting of Teflon and graphite. It impresses with increased temperature resistance and an increased service life of > 80,000 operating hours, regardless of start and stop cycles.The Aerzen Turbo G5plus is available in all flow rates from 300 m³/h to 8,400 m³/h, and with a maximum pressure of 1,000 bar. The current selection of blower sizes ranges from the small AT 25-0.8 G5plus to the largest model AT 200-1.0 G5plus. The series Aerzen Turbo G5plus lives up to its name, because it convinces through numerous advantages. The five new turbo machines have an extremely compact design and require very little space. Further outstanding features are the innovative AERZEN air foil bearings with double coating and the new multilevel frequency converter technology, which reduces the heat loss in the motor to a minimum and, consequently, improves the total efficiency significantly. Another advantage: an additional motor throttle or a sine filter, which has to be used with conventional frequency converters, is no longer necessary. The new air foil bearings represent a further decisive development thanks to double coating, consisting of Teflon and graphite. It impresses with increased temperature resistance and an increased service life of > 80,000 operating hours, regardless of start and stop cycles.The Aerzen Turbo G5plus is available in all flow rates from 300 m³/h to 8,400 m³/h, and with a maximum pressure of 1,000 bar. The current selection of blower sizes ranges from the small AT 25-0.8 G5plus to the largest model AT 200-1.0 G5plus. The series Aerzen Turbo G5plus lives up to its name, because it convinces through numerous advantages. The five new turbo machines have an extremely compact design and require very little space. Further outstanding features are the innovative AERZEN air foil bearings with double coating and the new multilevel frequency converter technology, which reduces the heat loss in the motor to a minimum and, consequently, improves the total efficiency significantly. Another advantage: an additional motor throttle or a sine filter, which has to be used with conventional frequency converters, is no longer necessary. The new air foil bearings represent a further decisive development thanks to double coating, consisting of Teflon and graphite. It impresses with increased temperature resistance and an increased service life of > 80,000 operating hours, regardless of start and stop cycles. All advantages at a glance:Increase of energy efficiency by up to 10% compared to conventional turbo technology.Extended bearing life thanks to innovative AERZEN air foil bearings with double coating, maximum reliability even under extreme operating conditions.100% oil-free.Lowest maintenance effort, only regular filter change.Extended fields of application at ambient temperatures up to 50°C.Active surge protection by means of automatic speed increase.Space-saving design.Press releasePI_AerzenTurbo_G5plus_EN.pdfPI_AerzenTurbo_G5plus_EN.pdfPI_AerzenTurbo_G5plus_EN.pdfPI_AerzenTurbo_G5plus_EN.pdfPress releasePress releasePress releaseImage (print quality)AerzenTurbo_G5plus_01.jpgAerzenTurbo_G5plus_01.jpgAerzenTurbo_G5plus_01.jpgAerzenTurbo_G5plus_01.jpgImage (print quality)Image (print quality)Image (print quality)
20/10/2020 - Process air mobile. Simply rent plug & play compressed air. Whether as an interim solution in an emergency or for planned maintenance work. The rental of oil-free compressed or process air offers operators of blower stations a welcome and helpful addition to the previous machinery. AERZEN Rental has been offering a comprehensive range of rental machines and... en savoir plus
02/10/2020 - AERZEN rotary lobe compressors optimised and extended with new sizes. In pneumatic applications or in municipal and industrial waste water treatment, the generation of process air is very energy-intensive. When operators use the right compressor for their process, they save energy. The extensive Delta Hybrid rotary lobe compressor series has therefore been further... en savoir plus
02/10/2020 - Product expansion for Delta Blower Positive Displacement Blowers Aerzener Maschinenfabrik’s extensive assembly series has been expanded to cover intake volume flows of 6300 m3/h. This enables AERZEN, one of the global market leaders in blower technology, to offer its customers even more finely graded blower sizes. Individual requirements for process air... en savoir plus
