The new AERtronic

AERZEN control technology - The path to the digital future

With the new edition of the AERtronic control AERZEN pushes the digitalisation in the compressed air production further. The intelligent assembly control system ensures greater transparency, safety and efficiency. Users can individually add further components to the control system.

Always at the optimum operating point

In the new control system, all measured values converge and are systematically evaluated. This makes it possible to transfer the data to the production control system via common interfaces and to operate the plant always at the optimum operating point. Operators can achieve full protection and align processes for maximum effectiveness. The integrated maintenance book also makes it easier to plan maintenance and thus increases maintenance efficiency.

Foto einer Steuereinheit an einer Maschine


  • Process analysis and associated avoidance of quality or output problems
  • Direct connection to the master process control system
  • Provision of all process parameters as well as maintenance and error information on the display, via interface and WebView
  • Simplest possibility of a holistic process view through interfaces
  • Full protection of your machine technology
  • Avoidance of machine damage
  • Best visualisation via 7" touch and user-friendly interface

Technical data at a glance

  • Voltages: 230V - 460V 50/60Hz
  • 7 inch resistive touch with 800 x 480 pixels
  • IP65
  • Linux operating system
  • Operation -20°C - +55°C
  • Common certificates like UL, CSA, EAC and many more
  • Micro SD slot
  • Modbus TCP, Modbus RTU, ProfiNet®, ProfiBus®, EtherNet/IP®

Basic, Advanced and Premium - the differences at a glance.

AERtronic Basic

Digital machine parameter display and fault indicator. The user can now read the relevant process parameters such as pressures and temperatures on a modern display and transfer them easily and conveniently to the control room via Modbus RTU interface - unlike its predecessor, an analogue display unit with circular instrumentation.
Furthermore, critical conditions in the process are identified via the sensor system, and at the same time, the device can shut down the machine, if necessary, to prevent damage.

AERtronic Advanced

With the additional option of actively controlling processes. By integrating individual special sensors and special actuators, additional plant processes can be actively controlled. In addition, the assembly can be controlled remotely via bus and digital communication.
Moreover, the plant operator has the option of transmitting the recorded parameters via Modbus RTU or other communication interfaces to his master systems such as Supervisory Control And Data Acquisition (SCADA).

AERtronic Premium

With connection to the AERZEN platform. The premium version of the AERtronic is based on the Advanced control unit and enables the operator to access further services via the AERZEN platform to increase availability, efficiency and evaluation. KI, which was trained and programmed on the basis of more than 150 years of mechanical engineering experience.