Vibration measurement and analysis New accessories for Delta Screw series An important component of the Delta Screw series made by Aerzener Maschinenfabrik GmbH is the comprehensive accessories programme. Particularly in cases of high-tech applications relating to high system pressures or reactive production ranges, the highest possible level of safety must be guaranteed. With a comprehensive accessories programme, Delta Screw series ensures the highest possible level of safety.In order to detect any damage to the compressor stage as quickly as possible, Aerzener Maschinenfabrik GmbH provides its customers with comprehensive solutions for vibration measurement and analysis. By means of SPN-nipples, and using an existing measuring system, the customer can identify independently any deviations from the standard which might occur. Alternatively, existing AERtronic control systems can be equipped with vibration sensors, in order to display the measured values. Permanent monitoring of the packaged unit can be undertaken completely automatically through the use of a connected vibration analysis system. This enables the customer to perform both vibration measurement and independent analysis of the rotor bearing level. Monitoring by Aerzener Maschinenfabrik GmbH In the final stage of expansion “Delta Real Time Monitoring” monitors vibrations, the pressure and the temperature of the machine via sensors. All of the measured values of up to eight diagnostic units are merged in real time in an independent switch cabinet and these values are transmitted immediately via internet, ethernet or GSM-modem to a special server at Aerzener Maschinenfabrik GmbH, where they are stored and can be retrieved at any time. If deviations from trend are observed there, countermeasures can be initiated at once.
