Efficiency optimisation of AERZEN turbo blowers Sizes AT400-0.8T and AT400-1.0T Since the product introduction of the extremely efficient turbo blower series, Aerzen Turbo, numerous AERZEN customers worldwide have already benefited from the energy savings. The AERZEN development team has now turned the efficiency screw once more for the sizes AT400-0.8T and AT400-1.0T. The Aerzen Turbo AT400The improved energy efficiency is the result of a redesign of the so-called twin turbo stages, in which two impellers run in parallel on the motor shaft of the permanent magnet motor. On the basis of complex CFD (Computational Fluid Dynamics) analyses, the turbo stages were driven to new peak values in terms of energy efficiency and motor cooling and were granted a corresponding patent. Numerous advantages The Aerzen Turbo sizes AT400-0.8T and AT400-1.0T cover flow rate ranges up to 16,000 m³/h, differential pressures up to 1 bar and drive capacities up to 300 kW. The innovative Aerzen turbo series are characterised by the following advantages: Increase in energy efficiency of up to 15% compared with conventional turbo technologyExtended bearing life thanks to innovative AERZEN air bearings with double coating (>80,000 operating hours, independent of start and stop cycles)Highest reliability even under extreme operating conditions and pressure fluctuationsLowest maintenance effort, only regular filter change100 percent oil-freeExtended application possibilities at ambient temperatures up to 50°CActive pump protection through automatic speed increaseSpace-saving design
New and revised marketing materials AERZEN has recently revised or introduced new marketing materials for the application areas of wastewater treatment, food technology and process gas technology.How can energy costs be saved in wastewater treatment? How can hygienically pure process air be generated? What requirements must modern process gas compression meet? These are some of the questions which AERZEN customers will have to ask themselves in order to address the challenges posed by Industry 4.0, globalisation and constantly increasing cost pressures. We are supporting you in dealing with these challenges and offer answers to your questions in our new brochures. You can download the new brochures using your CustomerNet access via our website, or printed versions can be ordered by completing this request form: https://www.aerzen.com/company/request-and-contact/directory-of-contacts.html
New head for Western Europe Matthew Morey has been appointed the new Director of AERZEN’s Western Europe region. He will, thus, run the ten Western European sales and service companies of the AERZEN Group, form a management team for the EMEA region with the other regional managing directors in Europe and be the primary interface with production.Morey joined the AERZEN Group in 2006. For the last 14 years, he has been the head of AERZEN Machines Ltd., Great Britain. This business has achieved many successes, laying the foundations for more of the same in the future. Now Matthew Morey’s strategic know-how and sound market knowledge will benefit the Western Europe region.
New Managing Director Aerzen Belgium In March 2020, Frederik Deboyser took over the management of Aerzen Belgium N.V., based in Kortenberg near Brussels. The graduate engineer, who successfully completed a degree in electromechanics in 1993, has been at home in the world of blowers for over 24 years. From 1998 to 2007 and since 2014 he was Sales Manager at AERZEN’s Belgian subsidiary. For the operational and strategic management of Aerzen Belgium the new Managing Director relies on a team which comprises both long-term as well as some relatively new employees. “With this mixture of our own experience and external developments, we are ready to develop the Belgian market with renewed vigour and energy, focusing on customer orientation and the quality of our products and services,” emphasises Frederik Deboyser.
Americas: Wastewater specialist supports Sales Jennifer Kintzer has taken over the position of application specialist for wastewater technology in the Americas region. With 25 years of experience in the wastewater industry, in her new role she will support the sales team in increasing performance in the wastewater industry in North, Central and South America and in the Caribbean. One of her priorities is the training of regional colleagues. Jennifer Kintzer worked in consulting for almost 20 years before she joined AERZEN USA as a Senior Applications Engineer, with responsibility for positive displacement blowers, screw compressors and turbo blowers.
APAC: New Regional Application Manager Wong Kah Wai took over the position of Regional Application Manager for the Asia/Pacific region (APAC) on April 1, 2020. He is based in Singapore. In conjunction with our subsidiaries in this region, he will seek to expand business with the wastewater industry. The 43-year-old has more than 15 years of experience in design, operation and consulting for leading wastewater companies such as Sembcorp Utility, UG M&E, Sumitomo Electrics, Mitsubishi Heavy Industries, United Engineers, Black & Veatch and CH2Mhill. Wong Kah Wai holds a Master of Science and a Bachelor of Engineering in Environmental Engineering from the University of Singapore.
