Proven co-operation Co-operating to produce a “clean” result In a joint project with Gericke BV and Hosokawa Micron BV at the beginning of February 2014, Aerzen Nederland supplied eleven vacuum blowers for a plant in Russia producing detergents. Together with Gericke BV (l.), Aerzen Netherlands has equipped a unit for production of detergents.Messrs. Hosokawa, a system provider in the field of drying, grinding, mixing and agglomeration of powders, with a subsidiary company in the Netherlands, received an order for a complete dosing, mixing and agglomeration unit for the production of various detergents for the Russian market. Hosokawa supplied the entire installation for a total of eleven extraction systems- and their partner Gericke was responsible for the eleven negative pressure systems. The components matter Since the 1970s, Gericke BV, a subsidiary of the Swiss company Gericke AG, has been supplying bulk material- handling systems to the Benelux states and far beyond. Customers mainly benefit from the company’s know-how, which achieves optimal functionality due to the selection and interaction of high-quality components. Finally, Gericke also provides a complete system warranty.As far as the topic of transport is concerned Gericke counts on the proven quality of blowers made by AERZEN. “We know exactly, how the components harmonise with the products specified by the customer and we know the flow rating of the powders or granulates”, says Ruud Padt, Sales Engineer at Gericke BV.“Furthermore blowers made by AERZEN can be adapted very easily to modified requirements concerning pressure or air, without having to change the complete machine.” Utmost flexibility Thanks to Delta Blower Generation 5 and Delta Hybrid, Aerzen Nederland BV can make adaptations to modified process data at short notice – if necessary even shortly before delivery. This makes it possible to complete a project, even though the parameters may have changed, within budget and within the agreed delivery time.The service department of AERZEN also contributed towards meeting the expectations and requirements of the end users, Hosokawa Micron and Gericke, and thus to reliable delivery and completion of the project.
New service station for Aerzen Polska The Aerzen subsidiary in Poland, Aerzen Polska, officially inaugurated its new service station at the end of last year. After extensive renovation of its spacious, newly acquired building in Katowice, all Aerzen blowers situated in Poland can now be maintained and repaired there. Three new crane systems with a load capacity of up to 10,000 kilograms provide a better and more extensive scope of service. The service team, under the leadership of Przemyslaw Tomczak, has grown to 29 employees. At the official opening ceremony, Aerzen Polska welcomed about 160 customers and guests, besides the Aerzen management and employees of the headquarters. Aerzen Polska is already planning for further growth: The rental machinery business will be developed. Therefore, an agency of AIR will move in within a short time.
New size Delta Hybrid D 152 The new and successful rotary lobe compressor range Delta Hybrid made by AERZEN has now been extended with the addition of a unit of a new size. Customers can select from an extensive range the optimal unit for their application. Delta Hybrid is a synergy of blower and compressor technology, and offers completely new possibili- ties in overpressure and negative pressure gen- eration of air and neutral gases by combining the technical advantages of both concepts.With 16 sizes in all, the Delta Hybrid units now cover intake volume flows of 110 m3/h to 9,000 m3/h and overpressures up to 1,500 mbar. The new sizes D 152 S and D 152 H are used in the upper volume flow range of from 2,400 to 9,000 m3/h with driving powers of up to 400 kW.
Automatic re-lubrication devices AERZEN has for many years been offering service contracts in various categories. These contracts are handled up to twice a year by an Aerzen service technician. Packaged units with high annual operating times may require more service calls for the relubrication interval of the electric motors.AERZEN has included automatic re-lubrication devices in the After Sales Service Programme, in order to offer a solution to the users. These systems are driven by electric motors; the dispensers are provided with the necessary power supply by an integrated removable battery which guarantees an operational period of at least 12 months. Cartridges for the dispensers are available in 3 different sizes and various types of lubrication. The devices can be applied at temperatures from 10 °C to +60 °C. Thanks to corresponding programming, the dispensed quantity can be very accurately dosed and adjusted to the requirements of the electric motor. Therefore, an efficient and safe lubrication without downtime is guaranteed. In this way it can be ensured that the system is permanently available.Retro-fitting of new AERZEN machine lubrication devices is also possible for existing standard motors.
AERZEN goes App Of late, AERZEN has been offering company- designed applications in the famous App stores. These include a unit converter specially for compressors applications, converting important parameters like pressures, temperatures, volume flows and performance data simply and quickly into diverse units. In addition, there are Apps available for the latest products, including Delta Hybrid, Delta Screw and AERZEN Turbo. All Apps are designed for Android as well as for Apple Systems. And best of all: AERZEN Apps are free of charge.
Personnel changes at Aerzen Turbo Mr. Chungsup Um started work as Managing Director of Aerzen Turbo on 2nd December 2013, succeeding Rob Lammers. Prior to taking up this role the 44 year-old had worked as a consultant for various other internationalcompanies. Early in 2014, Lammers returned to Europe to become Director Turbo Business for Aerzen International Sales GmbH. After working for three years in Korea for Aerzen Turbo, which he set up with a number of other colleagues, Lammers is now responsible for sales development, organisation of the Turbo business and improving of the Turbo production network.
New regional manager for America At the beginning of 2014 Friedrich Harten was appointed regional manager within Aerzen International Sales, and he is thus responsible for the control and operational leadership of the sales and servicenetwork of the AERZEN group in America. The graduate engineer in mechanical engineering has many years of experience in the capital goods industry. He has worked in various positions with international orientation, in both big concerns as well as in small and medium-sized enterprises. In his most recent role he worked for a German-American pump manufacturer focussing on the oil and gas industry.
